Driving training courses and schools
Commercial Driver License programs, certificates, diplomas and degrees

Total 299 training course(s)/program(s) at schools in Canada.



Carpenters Training Centre of New Brunswick Inc.

Training Centre/Campus: Saint John, New Brunswick, Canada
Phone No.: 1-506-632-8840

Powered Industrial Truck Operator

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This is a comprehensive 1 week, or 40 hours, program that will enable members to be job ready placing them as an employee of preference. This program offers an extensive portfolio of practical hands-on experience and covers the following objectives,

- Safe operating practices
- Personnel transfers
- Refueling
- Basic rigging
- Attaching, moving and holding loads
- Regular, daily and weekly inspections
- Log book entries
- Preventive maintenance and maintenance procedures
- Adjustments and repairs
- Lubrication procedures
- Calculating weight of loads
- Standard signals
- Reading load charts

Program Duration: 1 Week(s)

Program Pre-Requisites: Members applying for this program must have the following pre-requisites,

- Fall Protection
- WHMIS
- Must be on EI, eligible for EI, or have received EI in last 3 years
- If not eligible under EI a mem... [Read More]

Pile Driving

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This is a comprehensive 10 week program that will enable members to be job ready placing them as an employee of preference. This program offers an extensive portfolio of practical hands-on experience and covers the following objectives,

- Identify general safety rules
- Describe different types and issues of drawings for pile driving
- Identify features, views, lines, symbols, and abbreviations used on drawings for pile driving, bridges, and marine construction
- Identify the applications of transits and theodolites
- Use ratio (proportions), Pythagoras theorem and basic algebra for layout
- Describe layout of piling and structures on land and over water
- Layout of foundation piles and cap using tapes, strings lines, and spikes
- Describe construction of steel and PC-PS concrete pile bents and piers
- Define deep foundations, piles, caissons and drilled shafts
- Describe procedures for rigging up a crane pile ... [Read More]


Arnold Bros. Transportation Academy

Training Centre/Campus: Winnipeg, Manitoba, Canada
Phone No.: 204 231 1183

Professional Driver Improvement (Certificate)

Course Format: On-Site / In-House / Private Tutoring

This 8 hour program provides participants with the necessary tools and skills to improve their own approach to driving in the commercial environment.

Hours of Service/Log Books (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment

This 4 hour program is of value to all drivers required to maintain a logbook. Both U.S and Canadian regulations are covered. The course includes practical examples.

Effective Pre and Post Trips Inspections (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This 4 hour course covers both the theory and practical performance of pre and post trip inspections. With safety requirements more stringent than ever before, it is critically important that all professional drivers understand how to properly perform these inspections. Topics covered include: components and their functions, inspection criteria, actions to take when components fail or are suspect, and documentation requirements. Participants will watch a proper pre and post trip being performed, and will conduct a practical pre and post trip inspection under the guidance of the instructor.

Entry Level Professional Truck Driving (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

We are offering a 240/320 hour course, Entry Level Professional Truck Driver Training Program. The first 80 hours are classroom instruction. The remaining hours are in-cab instruction. The latter consists of 60 hours behind the wheel, 20 hours lab (pre-trip &, airbrake), with the remaining hours as observation time. During the last week you will be tested by Manitoba Public Insurance. Two practical tests are included in the cost of the program. Classes are held from 8:00 A.M. to 5:00 P.M., Monday to Friday.
You require the following, Class 5 Licence or higher, Class IA Instruction Permit, Drivers Abstract and a Criminal Search Certificate. A reading comprehension test administered by ABTA is also a prerequisite.
The Professional Driver’s Manual and the Air Brake Manual are available at any Manitoba Public Insurance Driver Licensing location or agent. The Driver’s Abstract is also available at the same location. A driver’s medical examination is required for your ... [Read More]


All Wheels Driver

Training Centre/Campus: North York, Ontario, Canada
Phone No.: 416.497.0204

Driver

Course Format: On-Site / In-House / Private Tutoring  V

All Wheel Drivers provide a Best and affordable driving school in North York for all the G1 and G2 needs.

We Have following cources:
1.Ministry Approved Beginner Driver
Education Program.
2.Ministry Approved Beginner Driver
Education Program.
Having 21 years of experience in driving instructions in North York and Its nearest GTA cities in Canada.

Driving

Course Format: On-Site / In-House / Private Tutoring  V

All Wheels Driver Training is just a professional team of driving education specialists. An approved driving instructor isn’t the approach we take to like to label ourselves. Although we do provide driving instruction, of course, we’re among the list of MTO approved driving schools in Ontario. However, our driving lessons usually are not a lot about instruction. We prefer to deliver patient, friendly education.


University of the Fraser Valley

Training Centres/Campuses: Abbotsford, Chilliwack, Mission, British Columbia, Canada
Phone No.: 604-504-7441

Heavy Duty/Commercial Transport (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

At UFV, we can put students on the road towards a career as a heavy duty, commercial transport, or agriculture technician by teaching them how to service and repair equipment such as trucks, crawler units, and farm tractors. The Heavy Duty/Commercial Transport program will prepare students for entry into the provincial apprenticeship program, or for entry directly into employment. Students will develop skills needed to work in the trade.

Theory and shop procedures are set up to simulate job conditions, so punctuality and good work habits are essential. This program exceeds the provincial standards of Foundation and ELTT programs taught throughout B.C.

Concurrent studies option

UFV allows high school students to complete this program through a concurrent studies model during their grade 12 year. For more information, contact your disctrict/school career counsellor. You may also contact the UFV Trades &, Technology Centre at 604-847-5448 or... [Read More]


Northwest Community College

Training Centres/Campuses: Hazelton, Kitimat, Masset, Smithers, Skidegate, Prince Rupert, Terrace, British Columbia, Canada
Phone No.: 1.877.277.2288

Class IV

Course Format: Public Course / Instructor-Led / Open Enrollment  V

A Class 4 Drivers License permits the holder to drive a vehicle with seating up to 25 persons. As such, it is essential for driving groups of clients as part of an Adventure Tourism business operation and therefore a valuable asset for the student in the job market. Students will be encouraged to pursue this certification, however, it will not be examined as part of the program overall mark. Students must ensure that they meet all prerequisites of this professional license.

Class 1 Driver

Course Format: Public Course / Instructor-Led / Open Enrollment

This 98-hour program prepares students to become Class 1 drivers in the trucking industry. It consists of 22 hours air brake endorsement training, 20 hours of hands-on training in regular maintenance, safety procedures and pre-trip inspection on truck and tractor, and 56 hours of behind-the-wheel driver training.

Class 3 Driver

Course Format: Public Course / Instructor-Led / Open Enrollment

This 70-hour program prepares students to become Class 3 drivers in the trucking industry. It consists of 22 hours of air brake endorsement training, 13 hours of hands-on training in regular maintenance, safety procedures and pre-trip inspection on truck and tractor, and 35 hours of behind-the-wheel driver training.


Northern Lights College

Training Centre/Campus: Dawson Creek, British Columbia, Canada
Phone No.: 1-866-463-6652

Defensive Driving

Course Format: Public Course / Instructor-Led / Open Enrollment  V

- Six Conditions of Driving: driver condition, anticipating changes in conditions, adjusting to changes in conditions, preparing for conditions.
- Hazard Perception and Avoidance: typical hazards, IRP 12 backing signals, how to spot hazards, vehicle positions, mirrors, scanning, wildlife, road hazards, large trucks - sharing the road, seat belts video.
- Split Second Decisions: critical incidents - mental preparation
- pretrip safety check and vehicle familiarization
- posture
- hazard avoidance
- defensive planning
braking techniques
signals and lane changes
steering control and lane position
acceleration
parking techniques and backing
intersections
preplanning
speed awareness
turns
stopping and starting

Learning Outcomes:
- demonstrate better defensive driving skills
- demonstrate improved hazard perception and avoidance skills
- de... [Read More]


Vancouver Island University

Training Centre/Campus: Nanaimo, British Columbia, Canada
Phone No.: 1-888-920-2221

Heavy Equipment Operator (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This intensive hands-on program provides training in the operation of heavy equipment, routine maintenance of machinery, and the practical field operations of excavating, land clearing, grading and road building. The curriculum includes pre-operational checks of equipment, as well as safe operating techniques specific to each machine.

This program is the only one of its kind offered at a publicly-funded post-secondary institution in B.C. Training can be customized to meet individual needs, as well as those of employers and industry. Training is available on excavators, backhoe/loaders, front-end loaders, graders, bulldozers, dump truck and pup, articulated rock trucks and skid steers. Class 1 and 3 driver training is also available.

Progress is monitored by the instructors as students move through a series of work projects. Progress varies for each person and depends on individual ability to master operating techniques. The instructors are highly train... [Read More]

Pages: 1 2 3 4 5 6 ...

[ Popular Topics ]



- Course Subjects -
Ask for Training
Add Courses