HVAC training courses and schools
Heating, Ventilation and Air Conditioning programs, certificates, diplomas and degrees

Total 66 training course(s)/program(s) at schools in Canada.



Southway Hotel

Training Centre/Campus: Ottawa, ON, Canada
Phone No.: 1(888) 384 4863

Process Efficiency for HVAC Systems, Engines, Turbines, ... Workshop

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This course will describe the best practices that can be applied to engines, turbines, steam generators, pumps, and heat exchangers.

Detailed analysis of thermal efficiency of different industrial applications will be presented. Based on different parameters, it will be shown how the system can be optimized, which can result in an increase of the overall efficiency. The course will also present the effect of piping thermal insulation and thermal efficiency improvement techniques will be discussed.

Objective:

This course will enable participants to:

- Interpret and review the thermodynamics and heat transfer processes in process equipment in order to apply appropriate thermal efficiency improvement techniques.

- Identify and analyze principles of thermal design of process equipment.

- Estimate the degree of inefficiency of process equipment and the way to improve its efficiency.

- Analyze and interp... [Read More]


Best Western Village Park Inn

Training Centre/Campus: Calgary, Alberta, Canada
Phone No.: 001(888) 384 4863

HVAC Control Systems - Design, Implementation, Commissioning, and Operation Workshop

Course Format: Public Course / Instructor-Led / Open Enrollment  V

A control system is at the heart of every building’,s energy use and its Indoor Air Quality. From standalone packaged pump controllers to sophisticated Building Automation Systems, the performance of building equipment rests largely on the design, installation, commissioning, and operation of its control. Yet, study after study by well recognized bodies indicate that most control systems are not performing as intended. Furthermore, studies show that most could achieve a significant improvement over and above the original intent at little additional cost, but fail to do so. Building owners, tenants, and managers can no longer afford to ignore the potential energy savings and associated reductions in green house gas emissions.

This course will take you through the steps necessary to understanding the basic principles: the critical steps in design, the necessary detailed descriptions required by the installers, the commissioning process, staged acceptance, impleme... [Read More]


Toronto Airport West

Training Centre/Campus: Mississauga, Ontario, Canada
Phone No.: 18883844863

Process Efficiency for HVAC Systems Engines Turbines Pumps and Steam Generators Workshop

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Available In-class and via Webinar.

This course will describe the best practices that can be applied to engines, turbines, steam generators, pumps, and heat exchangers. Detailed analysis of thermal efficiency of different industrial applications will be presented. Based on different parameters it will be shown how the system can be optimized which can result in an increase of the overall efficiency. The course will also present the effect of piping thermal insulation. Thermal efficiency improvement techniques will be discussed.

Objective:
This course will enable participants to:
Interpret and review the thermodynamics and heat transfer processes in process equipment in order to apply appropriate thermal efficiency improvement techniques.
Identify and analyze principles of thermal design of process equipment.
Estimate the degree of inefficiency of process equipment and the way to improve its efficiency.
Analyze and interpret pr... [Read More]


Red Seal Education Centre

Training Centre/Campus: Richmond, British Columbia, Canada
Phone No.: 7788667330

Electrical Certificate of Qualification Interprovincial IP Red Seal pre exam

Course Format: Public Course / Instructor-Led / Open Enrollment

1. Certificate of Qualification Pre Exam :

1). Plumbing Certificate of Qualification pre exam training Course

2). Electrician Certificate of Qualification pre exam training Course


Vancouver Island University

Training Centre/Campus: Nanaimo, British Columbia, Canada
Phone No.: 1-888-920-2221

HVAC/R (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This program, offered in partnership with School District #79 and Cowichan Senior Secondary School in Duncan, prepares individuals for entry into the heating (gas and oil), air-conditioning, and refrigeration industry service sector. The program provides a solid foundation in the fundamentals of installing, servicing, and troubleshooting all aspects of heating, ventilating and air-conditioning/refrigeration (HVAC/R) equipment, as well as customer relations.

Classroom instruction is combined with hands-on practical assignments and sophisticated computer-based instruction. The minimum pass mark for the program is 70 percent. On successful completion, students will receive a Vancouver Island University certificate, CFC handling certification from Environment Canada and the Province of B.C.

Maturity, good hand/eye coordination and problem solving skills with attention to detail are desirable qualities for individuals pursuing careers in HVAC/R. An opportun... [Read More]


St. Clair College

Training Centre/Campus: Windsor, Ontario, Canada
Phone No.: 1-800-387-0524

HVAC

Course Format: Public Course / Instructor-Led / Open Enrollment  V

A course in heating, air conditioning and ventilation applications intended to develop an intermediate level understanding of the relationships between HVAC systems and associated components and a building’s inherent heating, ventilating &, cooling loads. Topics include weather data and design conditions, thermal conductance, resistance &, heat transmission coefficients, factors effecting heat gains and losses, solar heat gains, computer assisted heating and cooling load calculations, effective use of insulating materials, estimating energy consumption, operating cost analyses and an introduction to system and equipment selection.


Sheridan College

Training Centres/Campuses: Brampton, Mississauga, Oakville, Ontario, Canada
Phone No.: 905-845-9430

HVAC

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Students validate and apply more advanced principles of thermodynamics and fluid mechanics to HVAC using the fundamentals of heat transfer, refrigeration, psychrometry and fluid flow. Students design an air-conditioning layout for medium size commercial building in one of various climatic locations for heating and cooling loads. They will utilize these loads to size a hydronics piping and air duct system including pump and fan power requirements. They will integrate these requirements in an overall building layout which will show the preliminary design of a building HVAC system including boilers, chillers, heat pumps, cooling towers, control valves, etc. They will practice these principles on lab equipment and solve problem sets.


Centennial College

Training Centre/Campus: Toronto, Ontario, Canada
Phone No.: 416-289-5300

HVAC (Diploma)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Centennial&,#146,s program prepares students for a career in Heating, Refrigeration, and Air Conditioning. You will acquire a broad knowledge of the design, installation and service techniques of heating and air conditioning systems for commercial and residential settings. Students learn to maintain, size and select equipment for air conditioning and refrigeration application.

Program Highlights
The world has become very technology focused with great strides being made in heating, refrigeration and air conditioning technology. The Heating, Refrigeration, and Air Conditioning Technician program spans the areas of design and engineering and encompasses, to name a few, the following: •The development of refrigerants
•Selection of equipment to meet the Seasonal Energy Efficiency Ratio (SEER) standards
•The efficiency standards for heating equipment
•Installation and service techniques


Cambrian College of Applied Arts and Technology

Training Centre/Campus: Sudbury, Ontario, Canada
Phone No.: (705) 566-8101

HVAC - HEATING, VENTILATION & AIR CONDITIONING TECHNICIAN (Diploma)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Cambrian College&,#146,s Heating, Ventilation, and Air Conditioning Technician program prepares students for Gas Technician 2 and Oil Burner Technician 2 certification exams administered by the Technical Standards and Safety Authority (TSSA). This program also covers air conditioning and refrigeration principles that relate to the layout, installation, and service of residential and light commercial heating and cooling applications. Cambrian College is accredited by and registered with the TSSA, allowing graduates to apply to the TSSA for certifications to be qualified to work in the heating, ventilation, and air conditioning field.


Global Innovative Campus

Training Centre/Campus: Edmonton, Alberta, Canada
Phone No.: 888 384 4863

HVAC and Building Control Systems ?Design, Implementation, Commissioning, and Operation (1.2 CEUs)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Description
A building control / automation system is the heart of high performance buildings. As building systems become more complex, control systems are needed to control them for the purposes of energy, comfort, safety and long term maintenance costs. Systems include heating, cooling, lighting, comfort, smoke evacuation, noxious gas controls, rainwater harvesting, energy production, and occupancy-based ventilation.
This course will take you through understanding the basic principles, the critical steps in design, installation, check-out, implementation and commissioning, performance analysis, and the steps needed towards successful day-to-day operation. More importantly, it will reveal the “do&,#146,’s and don’t&,#146,s?within each one of these steps.

This is a unique opportunity for designers, contractors, commissioning engineers, and operation personnel to understand, and discuss the experiences of the others, and learn from a presenter whose... [Read More]


Nova Scotia Community College Akerley Campus

Training Centre/Campus: Dartmouth, Nova Scotia, Canada
Phone No.: (902) 491-4900

Heating, Ventilation and Air Conditioning (HVAC)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

In this course the learners will be introduced to the principles of Heating, Ventilation and Air Conditioning (HVAC) as they relate to Heavy Duty Equipment and Truck and Transport systems. Learners will be given the opportunity to diagnose and repair HVAC systems. There will be hands-on training on various HVAC training aids as well as on actual equipment.


New Brunswick Community College

Training Centre/Campus: St. Andrews, New Brunswick, Canada
Phone No.: 1 888 796 NBCC

Refrigeration and Air Conditioning Technician HVAC/R

Course Format: Public Course / Instructor-Led / Open Enrollment  V

The Refrigeration and Air Conditioning Technician program provides you with the essential job skills related to the installation, maintenance, service and repair of residential, commercial and industrial Refrigeration and Air Conditioning systems. You will learn to keep homes and businesses comfortable. Your training is provided through specialized classroom lecture/ laboratory instruction, combined with Computer-Based Training (CBT) that prepares you for both entry-level positions and future career advancement.

What You Will Learn

refrigeration, air conditioning and heating mechanics
workplace safety
soldering, tubing and pipework
refrigerants and oils
RAC tools and equipment
electrical and motor fundamentals
heating, ventilation, air conditioning and refrigeration (HVACR) controls
CFC/HCFC/HFC controls in RAC
workplace experience (practicum)


College of the North Atlantic

Training Centres/Campuses: Bonavista, Carbonear, Clarenville, Gander, Labrador City, St. Anthony, St. Johns, Stephenville, Newfoundland, Canada
Phone No.: 1-888-982-2268

HVAC

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This course is designed to introduce the learner to building heating, ventilation and air conditioning (HVAC) systems. The course begins with an introduction to historical and contemporary HVAC systems emphasizing current energy conservation. Climate, comfort, passive and active design strategies are discussed, with a detailed study of building heat gain and building heat loss.


Northern Alberta Institute of Technology

Training Centre/Campus: Edmonton, Alberta, Canada
Phone No.: 780.471.6248, +18773336248

HVAC Specialist (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

The HVAC Specialist program provides students with entry-level job readiness and partial credit for the first two years of apprenticeship. The goals of the program are to provide familiarity with the HVAC/R industry and understanding of the operating principles of industry-specific equipment, systems and procedures. You&,#146,ll be introduced to the theory and equipment in the heating, ventilation, air conditioning and refrigeration industries. Studying air flow, controls, blueprint reading and computer software applications.

Curriculum Revision
The HVAC Specialist program is undergoing a curriculum revision as part of NAIT’s commitment to program excellence. While the overall intent and purpose of the program remains the same, beginning in the fall of 2012 a few course changes will occur. Revised course descriptions will be posted to the program web page when available.

Pages: 1 2 3 4 5

[ Popular Topics ]



- Course Subjects -
Ask for Training
Add Courses